Search found 11 matches

by piscvau
Mon Apr 02, 2018 5:43 pm
Forum: Help with using Inkscape
Topic: Path outset problem
Replies: 2
Views: 451

Path outset problem

Hello, I am using INKSCAPE for sewing pattern drawing. I need to use path outset for seam allowance. In INKSCAPE preferences I set "step/ inset/outset by" to 5mm. In document properties I have "scale x " set to 1. Yet when I draw a circle , objecto to paht, duplicate and path out...
by piscvau
Sat Oct 14, 2017 12:31 am
Forum: Inkscape & Cutters/Plotters
Topic: help with connecting a cutter to INKSCAPe
Replies: 4
Views: 1484

Re: help with connecting a cutter to INKSCAPe

I looken into the forum. Do I ned a USB to serial converter?
by piscvau
Sat Oct 14, 2017 12:17 am
Forum: Inkscape & Cutters/Plotters
Topic: help with connecting a cutter to INKSCAPe
Replies: 4
Views: 1484

help with connecting a cutter to INKSCAPe

Hello I struggled several days to get my GCC I-craft to work with INKCUT. I tried to cut several things with INKCUT and encountered many problems. After digging a little bit into this forum I discover that INKCUT is no longer developed and that another extension export/plotter is now available. So I...
by piscvau
Fri Oct 13, 2017 10:28 pm
Forum: Inkscape & Cutters/Plotters
Topic: using GCC I-craft with INKCUT under LINUX
Replies: 6
Views: 1786

Re: using GCC I-craft with INKCUT under LINUX

Hello
For the moment, I just succeeded in connecting the cutter to the software. I am going to start using it. Hope it works. Your post sounds a little scary!...
by piscvau
Thu Oct 12, 2017 2:20 am
Forum: Inkscape & Cutters/Plotters
Topic: using GCC I-craft with INKCUT under LINUX
Replies: 6
Views: 1786

Re: using GCC I-craft with INKCUT under LINUX

Hello, Yes I am french sorry for not using the right word for driver. How did I get it to work? Thanks to lwernars on the Sourceforge INKCut forum. I copied the results here because I wanted this to be useful to as many people as possible. After problems in the installation, I am now testing INKCUT ...
by piscvau
Tue Oct 10, 2017 5:54 am
Forum: Inkscape & Cutters/Plotters
Topic: using GCC I-craft with INKCUT under LINUX
Replies: 6
Views: 1786

Re: using GCC I-craft with INKCUT under LINUX

Remark; it might be necessary to have a paper feeded in the machine when you click on test connection"
by piscvau
Tue Oct 10, 2017 5:52 am
Forum: Inkscape & Cutters/Plotters
Topic: using GCC I-craft with INKCUT under LINUX
Replies: 6
Views: 1786

Re: using GCC I-craft with INKCUT under LINUX

Well I finally got the cutter to talk with the LINUX machine Here is what I did : Here is how to install the GCC I-craft cutter in Xubuntu Xenial 16.04 if it does not exist, create the directory ~/.config/inkscape/extensions/ inkcut where ~ is your home directory. download the extension on the web s...
by piscvau
Tue Oct 10, 2017 2:09 am
Forum: Inkscape & Cutters/Plotters
Topic: using GCC I-craft with INKCUT under LINUX
Replies: 6
Views: 1786

using GCC I-craft with INKCUT under LINUX

Hello I am desperately trying to get the GCC-I-Craft to woork with INKCUT under Linux. I have received much help on the inkcut sourceforge forum from someone under the pseudo lwarners but no solution came out. Just in case someone would have any positive experience please let me know. There does exi...
by piscvau
Mon May 16, 2016 2:14 am
Forum: Inkscape & Scribus
Topic: crop a SVG path and import in Scribus and open office
Replies: 4
Views: 4237

Re: crop a SVG path and import in Scribus and open office

I read on some of the forums about scribus that sometimes this warning can be ignored. As a matter of fact, it does work most of the time.
by piscvau
Wed May 11, 2016 1:31 am
Forum: Inkscape & Scribus
Topic: crop a SVG path and import in Scribus and open office
Replies: 4
Views: 4237

Re: crop a SVG path and import in Scribus and open office

Hello Thank you for your answer. I tried to unlink clones. It does not help. As for the pattern, I do move the pattern with the pattern handles so the gap does not show in Inkscape. But it shows in scribus and in openoffice!...And as my logo will be used in Open office and scribus and screen applica...
by piscvau
Wed May 11, 2016 12:41 am
Forum: Inkscape & Scribus
Topic: crop a SVG path and import in Scribus and open office
Replies: 4
Views: 4237

crop a SVG path and import in Scribus and open office

Hello I am trying to do may logo in Inkscape. My logo needs to have knitted stitches inside the letters. I am using scribus 1.4.6 and Inkscape 0.91. I want to keep the logo in a vector format so it can be upsized or downsized in the document. Please forgive if I do not use the précise command name a...

Go to advanced search