Export to Scribus (EPS-Problem)

Post about projects that involve using Inkscape and Scribus.
dafassi
Posts: 6
Joined: Fri May 14, 2010 5:52 am

Export to Scribus (EPS-Problem)

Postby dafassi » Fri May 14, 2010 5:56 am

Hi!
I made a test graphic with InkScape and whant to place it in Scribus.
Scribus SVG-Importer does not support 100% the InkSkape-Format so i whanted to use EPS.
BUT:
When i import a EPS the graphic is bad ... some lines are not in place ...

This is when i set the exportsetting in inkscape to "export area to graphic".
When i set this setting to "export area is the whole side" and import it to scribus everything is okay, but i have the whole side without transparency.
So- no way?

Cunka
Posts: 4
Joined: Sat Apr 24, 2010 2:40 pm

Re: Export to Scribus (EPS-Problem)

Postby Cunka » Tue May 18, 2010 9:11 pm

Hi Dafassi,

I use SVG's in Scribus that are exported from Inkscape, and they come across quite well.
http://docs.scribus.net/index.php?lang=en&page=importhints
http://docs.scribus.net/index.php?lang=en&page=scribus-svg

I found EPS format to be a problem with Inkscape/Scribus.

What was wrong with the SVG's Inkscape put out and what problems were their imported into Scribus?


Return to “Inkscape & Scribus”

Who is online

Users browsing this forum: No registered users and 1 guest