Plotter cutting from end point to home

Post about using Inkscape with cutters or plotters.
tiger-nick
Posts: 1
Joined: Thu Mar 08, 2018 1:35 am

Plotter cutting from end point to home

Postby tiger-nick » Thu Mar 08, 2018 1:39 am

Hey there!
Hoping to find an answer.

Inkscape and uscutter SC801 have been working great, except that when it is done cutting, it goes from the end position to the home position with the knife down. Generally this cuts a line through the entire piece on the plotter.

I have a feeling this is some setting, but i just can't find it. Any insight?

Thanks
-Nick

tylerdurden
Posts: 2014
Joined: Sun Apr 14, 2013 12:04 pm
Location: Michigan, USA

Re: Plotter cutting from end point to home

Postby tylerdurden » Thu Mar 08, 2018 2:41 am

Check the last post here, and let us know if that helps:

viewtopic.php?t=31889
Have a nice day.

I'm using Inkscape 0.92.2 (5c3e80d, 2017-08-06), 64 bit win8.1

The Inkscape manual has lots of helpful info! http://tavmjong.free.fr/INKSCAPE/MANUAL/html/


Return to “Inkscape & Cutters/Plotters”

Who is online

Users browsing this forum: No registered users and 1 guest