speed modelling challenge

Show off your finished Inkscape work.
Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

speed modelling challenge

Postby Lazur » Sun Jan 17, 2016 2:39 am

Challenge took over at irc #smc.
You can enter the channel through inkscape's site too, chat now joining smc by entering /join #smc.

The idea is to produce something on a theme within a given time limit.
Idea originates in blenderartists, and most work is done by using it, but it's not a must. There was even music related smc before -so using inkscape is just fine.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Sun Jan 17, 2016 2:42 am

Recent works:

Image

vehicle -50 minutes-


Image

hammock -38 minutes-

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Sun Jan 17, 2016 8:47 am

Image

rocket -49 minutes-

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Wed Jan 20, 2016 9:42 am

Image

wings -40 minutes-
(40 for the base then another 40 before uploading to ocal)

User avatar
brynn
Posts: 9584
Joined: Wed Sep 26, 2007 4:34 pm
Location: western USA
Contact:

Re: speed modelling challenge

Postby brynn » Wed Jan 20, 2016 10:34 am

Is it a different amount of time for each challenge? I'm not a very speedy Inkscape user. In fact, I'm downright slow!

But I do want to start up more drawing challenges and contests at Inkscape Community. When are these speed challenges announced, Lazur? So I can log on at the right time, and announce IC challenges.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Wed Jan 20, 2016 11:06 am

I'm new to this, but it goes as someone announces the theme by random, the duration and starting time, then anyone who is there can join in by typing "!in". The speed IS an important factor, you don't have time to hesitate or to polish/correct the composition. Good practice on tools and their effect, and how to implement an idea without dead-ends.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Thu Jan 21, 2016 9:00 am

Image

boombox -30 minutes-



Image

fox -30 minutes-

about the original rules:
speed modelling contest

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Wed Jan 27, 2016 4:09 pm

Image

phantom -40 minutes-

R.i.p. Tall Man.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Thu Jan 28, 2016 9:18 am

Image

Butterfly swords, 33 minutes.

User avatar
brynn
Posts: 9584
Joined: Wed Sep 26, 2007 4:34 pm
Location: western USA
Contact:

Re: speed modelling challenge

Postby brynn » Thu Jan 28, 2016 9:51 am

A fly covered in butter? lol :D

What about "butterflys words"? I could do a 33 minute drawing on that.

Out of curiosity, why do they choose odd times, like 33 minutes, instead of even 30 min? or 35?

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Thu Jan 28, 2016 4:18 pm

I don't know. Maybe 33 could be typed faster?
But anyone can set up a challenge, choose the time and theme. Haven't tried it myself though.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Sun Jan 31, 2016 9:09 am

flowers


Image

Started this a bit late, took 10 minutes.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Sun Jan 31, 2016 10:17 am


Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Tue Feb 02, 2016 9:12 am


Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Fri Feb 05, 2016 9:29 am

Image

ski

Made this one with tiled clones -wasn't a good choice because the lagging with the 27 MB made it impossible finishing strict within 25 minutes.

User avatar
Espermaschine
Posts: 893
Joined: Thu Jun 05, 2014 9:10 pm

Re: speed modelling challenge

Postby Espermaschine » Fri Feb 05, 2016 8:33 pm

Lazur URH wrote:Made this one with tiled clones -wasn't a good choice because the lagging with the 27 MB made it impossible finishing strict within 25 minutes.

These are all very interesting and skillfully done ! Especially the 'Rockets' are impressive.


How did you make the stars of your 'galaxy' piece ? Tiled Clones again or Spray Tool...or ...?

The 'Fox' was made with the brush you posted on OpenClipart, right ?

And the bend 'electric Pizza' stripes ? Is that Pap ?

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Fri Feb 05, 2016 9:01 pm

Thank's!

The stars were made with the spray tool, then size scaled with the tweak tool, then distributed randomly with the align and distribute panel.

The fox was made with a pattern along path lpe, with spiro path on the pen tool, nodes adjusted manually after.
The brush was made custom, it takes a few minutes only to draw a usable shape.

The stripes were also made with pattern along path lpe, but there the brush shape was based on interpolate subpaths lpe.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Sat Feb 06, 2016 9:35 am

Image

Saxophone, 30 minutes.

User avatar
Espermaschine
Posts: 893
Joined: Thu Jun 05, 2014 9:10 pm

Re: speed modelling challenge

Postby Espermaschine » Sat Feb 06, 2016 8:21 pm

Terry Gilliam called, he said he wants his saxophone back :D

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Mon Mar 21, 2016 1:43 pm

Revisited that wings piece for trying out a new fabric filter:

Image.

Just as if printed on canvas.

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Sun Feb 26, 2017 2:43 pm

Catching up with all of this:

Image
snow plow (30 min.)

Image
ugly grumpy fish (30 min.)

Image
sai (20 min.)

Image
apple (20 min.)

Image
mount olympus (30 min.)

Image
stasis pod (30 min.)

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Mon Feb 27, 2017 12:28 pm

dragon
Started as 40 minute challenge, tweaked a bit more.

(Also the thumbnail is generated by inkscape 0.91 (?) so it's a bit off at openclipart.)

Image

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Tue Feb 28, 2017 9:06 am

temple (30 min.)

Image

Challenge got cancelled since the other contestant got disconnected from the channel.

User avatar
Dillerkind
Posts: 326
Joined: Tue May 10, 2011 10:22 pm
Location: Germany
Contact:

Re: speed modelling challenge

Postby Dillerkind » Wed Mar 01, 2017 5:45 am

Maaan, look at that output, the sheer number of pieces! My favorite so far, I think, is the dragon from yesterday. Looks pretty vicious. Reminds me a bit of that tall castle picture of yours, you know, the 50+MB svg from a while ago. All very interesting stuff. I couldn't do that... simply not the way I draw. Very cool!
... My blog ... << Come visit me :) >> ... My thread ...

Lazur
Posts: 4386
Joined: Tue Jun 14, 2016 10:38 am

Re: speed modelling challenge

Postby Lazur » Wed Mar 01, 2017 8:53 am

Thank you!

To be honest that's not the way I draw either... just trying to get away from the overproduced look usually going way below the radar. The time limit is really a challenge, forcing to develop a drawing method that is easy as a pie.
That dragon was drawn in more than 40 minutes though -the links shows how it looked after the deadline. Could go on an on with it for hours.

Today's challenge was "skellicopter", in 40 minutes.

Image


Return to “Finished Inkscape Work”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest